Chicago Blues Box Amplifiers

Chicago Blues Box amps are made in Elmhurst, Illinois. They are basically reminiscent of Fender's Black and Silver face era amps. Built with the notion of sparring no expense, CBB has taken the ball and ran with it. While their amps are sans tremolo, the clean, piano like sounds are complimented by some of the nicest reverb around. For the players who wants no frills, just incredibly pure tone, check out a Blue Box!

.

 

 

Kingston 18

Kingston 18

 

  • 18 WATT
    12" Ceramic Speaker
    Tube Driven Reverb Circuit
    Long Style Reverb Tank
    Slave and External Speaker Out Jacks
    3-12AX7 Preamp Tubes
    1-5AR4 Rectifier Tube
    2-5881/6L6/6V6/EL34 Power Tubes
    1-High Input Jack
    1-Low Input Jack
    Panel Controls: On/Off-Standby-Bright-Harmonic Boost-Volume-Treble-Bass-Reverb

 

This amp is a 18 watt 1x12 combo's with a 12" Ceramic Tone Tubby speaker. The electronics are all hand wired on fiber epoxy resin eyelet board for circuit stability and hand wired with stranded silver plated wire. The resistors are custom made using the same factory and process that Zenith audio used in 60's. All resistor values are 1 watt. The chassis is made from extra heavy steal and the cabinet is of traditional build using pine woods with finger jointed corners for long lasting strength. The cabinet features large rubber feet to absorb stage noise and vibration and the large leather handle makes it a breeze to carry. From recording to live performance this amp is any musicians tone machine.

Please call 847-432-6350 or E-mail for pricing and availability.

 

 
Kingston 30

Kingston 30

 

  • 30 WATT
    12" Ceramic Speaker
    Tube Driven Reverb Circuit
    Long Style Reverb Tank
    Slave and External Speaker Out Jacks
    3-12AX7 Preamp Tubes
    1-5AR4 Rectifier Tube
    2-5881/6L6/6V6/EL34 Power Tubes
    1-High Input Jack
    1-Low Input Jack
    Panel Controls: On/Off-Standby-Bright-Harmonic Boost-Volume-Treble-Bass-Reverb

 

This amp is a 30 watt 1x12 combo's with a 12" Ceramic Tone Tubby speaker. The electronics are all hand wired on fiber epoxy resin eyelet board for circuit stability and hand wired with stranded silver plated wire. The resistors are custom made using the same factory and process that Zenith audio used in 60's. All resistor values are 1 watt. The chassis is made from extra heavy steal and the cabinet is of traditional build using pine woods with finger jointed corners for long lasting strength. The cabinet features large rubber feet to absorb stage noise and vibration and the large leather handle makes it a breeze to carry. From recording to live performance this amp is any musicians tone machine.

Please call 847-432-6350 or E-mail for pricing and availability.
Buddy Guy

Buddy Guy

 

  • 60 watts
  • 4x10 combo
  • Chicago Vintage 10" Custom
  • 2-6L6TAD
  • 3-12AX7
  • 20' AC Cord
  • pine finger jointed cabinet
  • tweed black laquer finish
  • cane grill for its tonal transparent quality
  • hand wound paper interleaved output transformer
  • 1 Watt custom made resistors with drifted component values that match the original drift of Buddy's magic '59 Custom made CTS pots made in the exact way they were made in 1959 (hand assembled with real carbon wafers and brass shafts) / The CTS pots match the drifted values of Buddy's volume pots (these pots are the real deal)
  • normal and bright channel, treble, mid, bass, presence, 4 input
  • Dual bias controls allow for individual tube biasing

Please call 847-432-6350 or E-mail for pricing and availability.

 


Sign up for our Email Newsletter
For Email Marketing you can trust


Electric Guitars:

Acoustic Guitars

Bass Guitars

Amplifiers

Effects